CyberPower Smart App OR1000ERM1U Line-interactive UPS – 1 kVA/600 W – 1U Rack-mountable – AVR – 8 Hour Recharge – 3.50 Minute Stand-by – 230 V AC Input – 230 V AC Output – 6 x IEC 60320 C13
CyberPower OR1000ERM1U Line-Interactive UPS offers Simulated Sine Wave output power for office system devices including PCs, workstations, networking devices, and peripherals. It’s typically integrated in the back office, server room, and data center environment to ensure a reliable backup power supply during power failures. In addition, the rackmount / tower convertible design gives it enhanced flexibility for installation and operation in almost any environment.
The UPS has a multifunction LCD display which offers real-time information, including input and output voltage levels, load and battery levels, battery runtime, overload warning, and a silent mode. With the network ports on the UPS, it prevents network devices from being subjected to sudden power surges caused by lightning, thereby avoiding potential system damage. As for battery maintenance, the UPS allows battery hot-swapping, which enables users to perform normal battery maintenance without significant interruption.
Controls/Indicators
| Status Indicators |
LCD Information Display:
-
-
- Operation Type
- Power Status
- Battery Status
- Load Status
- Other Information
LED Indicators:
|
Miscellaneous
| Environmentally Friendly |
Yes |
Interfaces/Ports
| Serial Port |
Yes |
| USB (HID Compliant) Port |
Yes |
Management
| Network Management |
SNMP/HTTP Remote Monitoring |
| Alarm |
Overload |
| Battery Mode |
| Low Battery |
| UPS Fault |
Technical Information
| Application/Usage |
Airport |
| Workstation |
| POS Terminal |
| SOHO Office |
| Network Storage Device |
| Supermarket |
| Factory |
| Train Station |
| Office |
| Data Center |
| Computer |
| Telecommunication |
| Network Device |
| Surveillance System |
| Server Room |
| Multimedia Device |
| Security System |
| Dataline Protection |
RJ-11 |
| RJ-45 |
| Overload Protection |
Yes |
| Plug/Connector Type |
IEC 60320 C14 |
| Phase |
Single Phase |
| Receptacle Type |
IEC 60320 C13 |
| EMI/RFI Noise Filter |
Yes |
| AVR |
Yes |
| Energy Saving |
GreenPower UPS Bypass Technology |
| Number of Battery & Surge Outlets |
4 |
| Number of Surge-only Outlets |
2 |
| Transfer Time |
4 ms |
| Receptacle Detail |
6 x IEC 60320 C13 |
Environmental Conditions
| Thermal Dissipation |
24 BTU/h |
| Maximum Operating Temperature |
40°C |
| Maximum Operating Elevation |
3.05 km |
| Maximum Storage Elevation |
15.24 km |
| Storage Relative Humidity |
0% – 95% |
| Storage Temperature |
-15°C – 45°C |
Physical Characteristics
| Weight (Approximate) |
13.70 kg |
| Form Factor |
Rack-mountable |
| Rack Height |
1U |
| Height |
43.2 mm |
| Width |
431.8 mm |
| Depth |
388.6 mm |
Battery Information
| Battery Chemistry |
Sealed Lead Acid (SLA) |
| Hot Swappable |
Yes |
| Number of Batteries |
1 |
| Backup/Run Time (Half Load) |
14 Minute |
| Backup/Run Time (Full Load) |
3.50 Minute |
| Replaceable Battery |
Yes |
| Typical Battery Recharge Time |
8 Hour |
General Information
| Product Type |
Line-interactive UPS |
| Manufacturer Part Number |
OR1000ERM1U |
| Manufacturer Website Address |
http://www.cyberpower.com/au |
| Manufacturer |
CyberPower Systems, Inc |
| Product Model |
OR1000ERM1U |
| Product Name |
Smart App OR1000ERM1U 1000VA Rack-mountable UPS |
| Product Line |
Smart App |
| Brand Name |
CyberPower |
Power Description
| Input Voltage |
230 V AC |
| Output Voltage |
230 V AC |
| Load Capacity |
1 kVA/600 W |
| Surge Energy Rating |
810 J |
| Waveform Type |
Simulated Sine Wave |
| Input Voltage Range |
165 V AC – 271 V AC |
| Output Frequency |
60 Hz |
| Input Frequency |
60 Hz |
